Below are just a few examples of the car registration plates we can manufacture.
If you can not see what you are looking for, please contact us and we will do our best to make the perfect plate for your needs.
The Hand Painted plates are an aluminium backing with a stove enamel black paint applied. The registration number is painted by hand onto the backing plate in either White or Off White. We can offer many period correct fonts, so please get in touch for further examples.
Die Pressed Aluminium Plates were introduced in the early 1930’s.
16g polished or brushed aluminium is embossed with the registration and then stove enamelled black. Up until 1963 registrations were a maximum of 6 digits at 3 ½” and had 21×5” plates or 11-14 x 9⅟4”.
Embossed borders were an option on standard sizes. Many marques decided to use non-standard sizes such as Rolls Royce, Jaguar and Ferrari. We can manufacture plates to suit all of these vehicles using our period equipment. We have different options for these plates, so please contact us and we will guide you through the choices available.
Tippers are the only supplier of original Gothic aluminium digits.
We also maintain a large stock of NOS aluminium digits from ACE, HILLS and BLUEMELS.
These are 3.1/2″ digits, making them period correct for vehicles between the 50’s and early 60’s.
We can offer plastic digits for your number plates. These are available in 3.1/8″ or 3.1/2″ dependent on the year of your vehicle. Digit Plates were first introduced to mimic the cast plates with flat or oval digits, but then manufacturers changed to peaked and then trapezoidal profiled digits. Initially made in cast aluminium, by the 1960’s these were replaced with injection moulded plastic. They can be painted in White, Off White or Silver and will suit most standard size aluminium plates.
Die Pressed Aluminium Plates were introduced in the early 1930’s.
16g polished or brushed aluminium is embossed with the registration and then stove enamelled black.
Plates were generally 20½ x 4½ or 11 ¾ x 8⅜ using the 3.1/8″ digit. Many marques decided to use non-standard sizes such as Rolls Royce, Jaguar and Ferrari. We can manufacture plates to suit all of these vehicles using our period equipment. We have different options for these plates, so please contact us and we will guide you through the choices available.
Below are some examples of the brushed aluminium for the plain or older look.
US, Italian and most imported cars often require special sized plates to fit within the bodywork or pre-existing frames.
Typically the imported vehicles use the smaller motorcycle 2½” digits. We can manufacture these in the Die Pressed Aluminium or the rare import size plastic characters (subject to stock levels).
Reverse Engraved Acrylic Plates were developed in the early 1970’s and feature the registration being engraved into the black backing of the plate. This allows the material on the reverse (polished or brushed aluminium) to be seen through the clear acrylic.
These plates use the 3.1/8″ size character for most vehicles, however we can manufacture the plates to almost any size including Motorcycles and Imports.
Vinyl self adhesive plates are typically used on the front of the E-Type Jaguar and racing vehicles.
The vinyl plates have the options of Silver, White or Off White digits.
The sizes can differ massively between vehicles so please specify your requirements when contacting us.
